Home > Motorcycle Lights >

1.85" Diameter Replacement Clusterz

1.85in LED round cluster

Alternative Views:

Price each $24.99

LED color / Base 1.85cluster:


48 LEDs - When the LEDs are off they are clear. Choose how you would like the cluster to come. We can add a 1156 base at the end of a pigtail, 1157 base at the end of a pigtail or just leave it as a hard wire. There is double sided 3M tape on the back of the cluster for mounting.

The no base(hard wire) has 3ft of wire and is a simple 3 wire install. A orange wire for the running, Red wire for high(Brake), and black wire for ground

Choose: red LED amber LEDs

Choose what kind of base need: 1156, 1157, no base(hard wire)

sold indivdually

This product was designed and manufactured by Radiantz LED Lighting, Inc. and available to the public since 1999

Average Rating: 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
rear tail lights July 30, 2017
Reviewer: CHARLES HART from Carpinteria, CA United States  
Installed on a 1955 Austin Healey 100 with some redesign of the mounting plate.
The lenses are very shallow and left no gap

Was this review helpful to you?

  0 of 0 people found the following review helpful:
awesome light July 12, 2017
Reviewer: Dennis Hughes from POQUOSON, VA United States  
I needed a small bright replacement light for the single function LED that came with my SLC kit car and this light does parking lights and blinks brighter with turn signal on and it looks great

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Extremely bright May 4, 2016
Reviewer: Bruce from United States  
I have experimented with several types of LED lights from other suppliers which were not bright enough to be used as a stoplight/tail light on a motorcycle.  The clusterz 48 LED is perfect for my application, only it's too bright!  I can easily adjust the intensity with resistors to get it where I'd like.  Too much is better than too little!  The size is just right too for fitting into an OEM HD turn signal housing.  An amber lens is fine to use with the Red LED as the red overpowers the Amber Lens.  However Red or smoke color lens's are available to use if desired.   This is much brighter than any bulb type rear tail light, you won't be missed on the roads; only I'd recommend using some 200 ohm to 600 ohm resistors to get it to what works for your application so that you don't hurt the eyes of anyone behind you.  Each lead can be adjusted individually based on how opaque the lens is.  I am using 600 ohms on the running light and 200 on the stop light.

Was this review helpful to you?